Car Wireless Camera Kits
Car wireless camera kits is the new popular cameras for wireless communications by WIFI monitor. This wifi monitor and car wireless camera can connect and show images directly without cable engineering.
According to chips solution, there are USB/AHD/IPC chips solution for wifi communication. Usually USB board sensor keep the lowest cost with worst quality, and IP camera solution offer the best performance with best quality.
Each wireless monitor can connect 1-4pcs wifi cameras. The monitor can choose quad screen or stanard screen.
Features:
- 1/3 CMOS Sensor
- 2.0MP/3.0MP optional
- 2.8mm/3.6mm/6mm full glasses lens
- 5-15m IR nightvision
- Metal IR Cut for lifetime
- Enhanced WIFI for truck and trailing
- Waterproof optional
- Onvif optional
- 12V DC input
Specifications
| Image Sensor | 1/3″ CMOS XM530+GC2253 |
| Signal System | PAL/NTSC |
| Effective Pixels | 1920*1080, 1-25fps |
| Min. illumination | 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Video Compression | H.264 |
| Bit Rate | 32Kbps~16Mbps |
| Shutter Time | 1/25(1/30)s to 1/50,000s |
| Lens | 2.8mm (92.6°), 3.6mm (74.6°) optional |
| Audio | Support 1CH MIC |
| WDR | 80db |
| Housing | Metal vandal proof |
| Day & Night | ICR |
| Protocols: | TCP/IP, UDP, HTTP, FTP, DHCP, DNS, DDNS, PPPoE, |
| Synchronization | Internal synchronization |
| Video Frame Rate | 1080P@25fps |
| Connector | Standard RJ45 |
| S/N Ratio | ＞120dB |
| Operating Conditions | -20 °C – 45 °C (-4 °F – 113 °F), Humidity 90% or less (non-condensing) |
| Power Supply | 12 VDC±15%, 1amp， |
| Power Consumption | Max. 2W |
| IR Range | Up to 20m |
| Dimensions | 80*93*93 M |
| Net Weight | 450g |