FAQs

All our people counter support built-in clock. With GPS or3G/4G, our people counter will correctd every 15minutes, otherwise the time will get much different from the real local time. Many countries have DST and many different time zones, also makes troubles on record time. We usually only use device time as the final time.

Users must make counter connect GPS or 3G. So it will sync time automatically to authority time server by GPS or 3G. The frequency of update is setuped in minutes. Users must setup time server in our BPC client too.

NTP server

Setup Sync Frequency and UTC.

ACC Connect Engine Ignition Switch

Different from other counters in the world, Watchdog bus passenger counter require ACC connection to our counter. Many people wonder why others not have such requirement. Because this is our gold experience during thousands of units in the world.

1. Get Trip Records：

Counter will reset counting numbers in display to 0 after engine stop. It is a very useful feature to help you can get counting numbers for every trip. Not only a lasting numbers.With it, you can realize workable and user-friendly on board passenger numbers.This numbers also can be shown in LCD monitor or Bus TV, or realtime bus APP.

2. Stop Mistake Accusmate Accumulation

Bus environment is different from others. […]

All our bus passenger counter must work with door sensors, otherwise it will keep counting but never send out any data to your device or server.

When bus passenger counter running in the real bus, door sensor will help to judge station status. When bus arrive station, the people counter will start counting at once. And when bus door is closed, none of passengers will be counted, even these passengers stand under the cameras. In most of cities, passengers like to stand under the cameras when the bus is closed to their destination station. Without door sensor, there must be lots of wrong counting data.

In office test, or complexed door sensor environment, you can […]